Cross recessed(+)Truss head machine screw Small head(Coarse Stainless steel Unplated 5X45(Small head Pitch 0.8

This is a female threaded component used in combination with male threaded parts such as bolts. A spanner or wrench is required for tightening.
There are four standards: Type 1, Type 2, Type 3, and Type 4, however only Types 1 through 3 are commonly available in general distribution.

Hex Nut

• Cross recessed (+) truss head machine screw Small head Coarse pitch
• Nominal diameter (d) M5
• Length under head (ℓ) 45.0
• Pitch (P) 0.8
• Cross recess number 2
• Head diameter (dk) Nominal 10.6 Tolerance 0,-0.6
• Head height (k) Nominal 2.8 Tolerance ±0.15
• Cross recess (m) Reference 4.7
• Cross recess depth (q) Max 2.53 Min 1.99