Flange buttonHex socket head cap screw(Coarse Steel Zinc plated(Silver) 4 X 8(P=0.7 Pitch 0.7

Please contact us if you need to verify the thread section

JIS B 1174
A hex socket button bolt characterized by its rounded head shape.
Also known as a button cap screw.
Compared to a hex socket head cap screw of the same size, the hex socket is smaller.
There are two types of button cap screws: the "3S Standard," an industry association standard (union standard) that was established earlier, and the "JIS Standard," which was subsequently established in accordance with ISO. The two types differ in head dimensions.
3S Standard (Manufacturers: Tokokisha Kinzoku SS, Gosho SS, Chubu Raiji, Kyokuto SS)
JIS Standard (Manufacturers: Nissan Neji, Ansco, Alps Seiko)

Button CAP Standard Comparison
Thread Pitch List

• Flange button cap screw (coarse pitch)
• Nominal diameter (d): M4
• Length under head (ℓ): 8.0
• Pitch (P) coarse pitch: 0.7
• Head diameter (Φdk): Nominal 6.8, Tolerance 0,-0.36
• Neck diameter (Φda): Max 4.7
• Hex socket width across corners (e): Min 2.87
• Head height (k): Nominal 2.2, Tolerance 0,-0.25
• Under-head fillet (r): Min 0.2
• Hex socket width across flats (s): Nominal 2.5, Tolerance +0.080,+0.020
• Flange section diameter (Φw): Nominal 9.2, Tolerance 0,-0.4
• Hex socket depth (t): Min 1.3
• Flange section thickness (h): Min 0.7