Hex bolt(Partial thread(Coarse Steel Chromate(Ochre) 12X200 Pitch 1.75

Generally, a bolt refers to a screw used together with a nut. The most representative type is the hex bolt, which has a regular hexagonal head and is tightened using a wrench or spanner.
It can be tightened more securely than slotted or cross recessed screws.
●Full Thread = A bolt in which the entire length below the head is threaded. (Generally used as a guideline for lengths of 30mm or less.)
●Partial Thread (medium bolt) = A bolt that is only threaded from the tip partway up the shank.
Partial Thread Calculation Method (approximate guideline)
L = up to 129　　　Nominal thread diameter × 2 + 6
L = 130 to 219　　 Nominal thread diameter × 2 + 12
L = 220 and above　　　　 Nominal thread diameter × 2 + 25
Example: For an M10×250 partial thread bolt, since L (length) is 220 or more, the threaded portion is 10×2+25 = 45mm.
Thread Pitch & Hex Width Across Flats Reference Chart　Hex Bolt Encyclopedia

Hot-dip galvanized coating has a large film thickness, and may not be compatible with other surface treatments.
In addition, even products with the same hot-dip galvanized finish may not be compatible if purchased from different sources.
In such cases, we may not be able to accept returns, so please be aware of this before proceeding with your purchase.

• Hex bolt, partial thread (coarse pitch)
• Nominal thread diameter M12
• Length under head (ℓ) 200
• Coarse pitch 1.75
• Head height (k) Nominal 8
• Width across flats (s) Nominal 19
• Width across corners (e) Approx. 21.9