12.9 Hex bolt(Coarse Steel Chrome(Silver) 12X240 Pitch 1.75

Please contact us if you need to verify the thread section

This is a bolt with a strength class of 12.9, stamped with "12.9" on the head.
It has a regular hexagonal head and is tightened using a wrench or spanner.
It can be tightened more securely than slotted or cross recessed screws.
●Full thread = A bolt where the entire length below the head is threaded. (General guideline: lengths of 30mm or less)
●Partial thread (medium bolt) = A bolt that is only threaded from the tip partway up the shank.
Partial thread length calculation method (approximate guideline)
L = up to 129     Nominal thread diameter × 2 + 6
L = 130 to 219   Nominal thread diameter × 2 + 12
L = 220 and above   Nominal thread diameter × 2 + 25
Example: For an M10×250 partial thread bolt, since L (length) is 220 or more: 10×2+25 = 45mm of threaded length.
Thread Pitch & Hex Width Across Flats Reference　Hex Bolt Encyclopedia

• 12.9 Hex bolt Coarse pitch
• Nominal thread diameter M12
• Length under head (ℓ) 240.0 Partial thread Thread length 49
• Coarse pitch 1.75
• Width across flats (s) Nominal 19 Tolerance 0,-0.35
• Head height (k) Nominal 8 Tolerance ±0.2
• Body thickness (ds) Basic dimension 12 Tolerance 0,-0.2