Hex high-tension boltF10T Steel Unplated 24X150 Pitch 3.0
Please contact us for thread section confirmation
Product Details
- Hex high-tension bolt F10T
- Nominal diameter (d): M24
- Length under head (ℓ): 150.0
- Body diameter (d1): Nominal 24, Tolerance +0.8,-0.4
- Head height (H): Nominal 15, Tolerance ±0.9
- Hex width across flats (B): Nominal 41, Tolerance 0,-1
- Head surface diameter (D): Reference 39
- Head bearing surface diameter (D1): Min 38
- Neck fillet (r): 1.6~2.4
- End chamfer (K): Approx. 3
- Screw hole eccentricity (a-b): Max 1.2
- Head bearing surface step height (h): 0.4~0.8
- Thread length (S): Nominal 45, Tolerance +6,0
- Note) 1. The measurement position of d1 shall be ℓ 0≒d 1/4.
- 2. The incomplete thread length x shall be approximately 2 pitches, and for full thread it shall be approximately 3 pitches.
- Nominal diameter (d): M24
- External thread outer diameter: 24
- Height (H): Nominal 24, Tolerance ±0.4
- Hex width across flats (B): Nominal 41, Tolerance 0,-1
- Upper surface diameter (D): Approx. 39
- Bearing surface diameter (D1): Min 38
- Screw hole eccentricity (a-b): Max 1.2
- Bearing surface step height (h): 0.4~0.8
- Note) The chamfer of the thread section on the nut bearing surface side shall have a diameter of 1.0~1.05d.
- Washer nominal size: 24
- Inner diameter (dw): Nominal 25, Tolerance +0.8,0
- Outer diameter (Dw): Nominal 48, Tolerance 0,-1
- Thickness (t): Nominal 6, Tolerance ±0.7
- Chamfer (c or r): Approx. 2.4
- Note) The drawing shows both 45° chamfered items and items with dome (r), and either one of these is used.
Hex high-tension boltF10T Steel Unplated 24X150 Pitch 3.0
| Steel | Unplated | 24X150 | View Details |
|---|